11
Front Panel
1. STANDBY -
Turns the unit on and sends the
unit to standby mode. In standby mode, the unit will use a
minute amount of power to enable power-on by the remote
control.
2. DISC TRAY -
Loads DVD+R/RW, DVD, CD-ROM,
SVCD, MP3, JPG and other optical discs.
3. VFD DISPLAY -
The front Display shows information
about the unit’s operation, such as current chapter and
elapsed time during playback and disc tray status.
4. REMOTE
RECEIVERS
5. OPEN/CLOSE -
Press to open or close the disc tray.
6. RECORD -
Begins a Live Recording.
7. STOP -
Press once to stop playback of a disc and save
the location of the stop point. The disc can be played
back from the stop point by pressing PLAY. To erase the
stop point and reset the play location to the beginning of
the disc, press STOP a second time.
8. PLAY/PAUSE -
Begins playback of a disc, chapter or
track. Press again during playback to pause, and again
to resume playback.
9. REC MODE
-
Selects the recording quality mode HQ,
SP, LP, EP, EP+.
10. 12.
NEXT/PREVIOUS -
Advanced to the next track or
plays previous track on DVD and other disc.
11. SOURCE -
Selects Input Sources when the Recorder
is in Live Record mode - TV Tuner, VIDEO IN 1 / 2,
S-VIDEO IN 1 / 2. And switch DVD Recorder mode to
live recorder mode.
11
14
13
15
17
18
16
19
10
11
FUNCTIONAL OVERVIEW
1.STEREO AUDIO INPUTS -
Use with S-VIDEO2 IN
or VIDEO2 IN 1for recording.
2.VIDEO2 INPUT -
Composite Video input for
recording. To select this input, use the SOURCE button
and choose VIDEO IN 2.
3.S-VIDEO2 INPUT -
S-VIDEO input for recording. To
select this input, use the SOURCE button and choose
S-VIDEO IN 2.
1
1
2
3
Right Side Panel