background image

12

13

Using the Wheelchair Brakes

Aspire Evoke 2 Manual Wheelchairs have locking brakes to ensure no movement occurs when the 
wheelchair is in a stationary position

 WARNING!

 Brakes should always be locked when leaving a user unattended in the wheelchair.

 

WARNING!

 Ensure quick release axles are mounted correctly and locked in place prior to seating  

 

a user.

Quick Release Wheels  

If the rear wheels need to be removed for repair or replacement, quick release axles are fitted to assist.

1.  To engage brakes, push 

forward on the brake 
lever until firmly locked 
in place. 

2. To disengage brakes, 

pull back on the brake 
lever until unlocked

1.  To detach the rear wheel from the frame, press & hold the 

release button and remove the wheel from the frame 

2. To attach wheel, reverse step 1 

1

1

2

2

Aspire Evoke 2 & Evoke 2 JNR Manual Wheelchairs have multiple adjustment points to ensure maximum 
comfort for users. It is very important that the below steps are followed when adjusting the wheelchair to 
ensure maximum safety.

 
Adjusting Backrest Height

Adjusting Backrest Tension

 

 

 

Adjusting Seat Depth and Rear Wheel Position

 

9. ADJUSTMENTS

1

1

1

2

2

2

1.  Peel back upholstery in the 

lower edge of the backrest 
cane to reveal two bolt 
heads

2. Remove 8 bolts (4 x each 

side) and reposition canes 
as required

3. Tighten bolts and reattach 

upholstery

1.  Peel back upholstery to 

reveal velcro adjustment 
straps

2. Reposition straps to desired 

position and reapply 
upholstery securing in 
place with velcro

1.  Remove all bolts as shown 

and move backrest receiver 
bracket to the desired seat 
depth.

2. To adjust rear wheel position 

and height, the axle mount 
and receiver can be adjusted 
as shown.

  Once at the desired position, 

ensure all hardware is 
tightened securely. 

NOTE: 

Ensure the rear wheels are located in symmetrical positions on both sides of the chair to 

maintain stability.

Summary of Contents for EVOKE 2
















Reviews: