background image

10

7. WARNINGS

CARE FOR YOUR CHAIR

•  The nylon seat and backrest upholstery 

can be removed by simply loosening 

the screws and washed with a wet 

sponge and a mild detergent. All other 

components can be cleaned with a damp 

cloth.

•  Check tyre condition at least twice per 

month. 

•  Check that rear wheel spokes are not 

loose. Loose wheel spokes can reduce the 

strength of the rims and must be safely 

adjusted by a qualified technician.

•  Always keep rear wheel quick release 

axles clean and free from dirt and hair 

build up.

•  Should push rims become scratched 

these should be de-burred or replaced to 

avoid damage to skin (not necessary for 

transit model) 

 

•  Brakes should be checked regularly. 

Brake effectiveness can be reduced by 

incorrect tyre pressure. 

•  Should you have any doubts about the 

correct functioning of the wheel chair or 

of any of its components, please contact 

AIDACARE on 1300 133 120 or your local 

Aspire distributor.

•  The tool kit provided will allow basic 

adjustments to the wheelchair, for 

further information on repairs and 

service contact AIDACARE on  

1300 133 120.

MAXIMUM WEIGHT CAPACITY: 130kg (190kg for Evoke HD Models) - NEVER 
EXCEED THIS WEIGHT LIMIT 

•  The foot plates are not designed to be a weight bearing surface. Never stand on the 

footplates as the wheelchair may tip over.

•  Pay attention to your fingers when folding or opening the wheelchair and when self-

propelling the chair with hands in close proximity to wheel spokes.

•  Always use push rims to bring the wheelchair to a stop. Do not use the brakes to stop a 

moving wheelchair.

•  Never use the wheelchair on escalators, even if accompanied by an attendant.

8. WARRANTY

The Aspire EVOKE Lightweight Manual wheelchair has a two year warranty. Please keep the 

purchase invoice as proof of warranty commencement. 
Aidacare is bound by Australian Consumer Law in respect to ‘Warranty against Defects’ on 

this product.A copy of the Aidacare ‘Warranty against Defects’ statement is available off 

the Home page of our website at www.aidacare.com.au Any contact in regard to warranty 

matters should be made to Aidacare Customer Service staff on 1300 133 120 or where 

support will be provided.
Aidacare does not warrant against excessive or incorrect use, modification or any situation 

that could not be deemed as fair wear and tear. Tyres, tubes and castor wheels are not 

covered under the 2 year warranty as these are considered consumable items. 

Summary of Contents for EVOKE













Reviews: