background image

9

The brakes do not work properly

•  Check distance between tyres and brake foot is sufficient such that the requisite 

amount of force can be applied to the tyre surface to stop it moving when the brake 
is in the engaged position

The wheelchair cannot be opened or folded easily

•  Check that the backrest straps are not adjusted too tightly
•  Clean the crossbar under the seat and apply some grease
•  Check that nothing has become lodged under the seat or in and around the cross 

bar mechanism.

•  Check foot plates are folded up

The wheelchair is unstable

•  Ensure all screws are tight
•  Ensure that if seat is adjusted to maximum depth or if backrest canes are located 

further back than the rear wheel axles, anti-tip wheels must be fitted.

Correct adjustment of the wheelchair is essential for the successful and safe use of 
this product.
Should assistance be required, contact Aidacare on 1300 133 120.

6. CARE & MAINTENANCE

Weekly

Periodically

Yearly

Serviceable Components

•  Check brakes 

are functioning 

properly

•  Check for signs 

of wear on front 

castors

•  Check for signs of 

wear on rear tyres

Service to be 

completed by 

authorised Aspire 

service agent

•  Wheels

•  Forks

•  Axles

•  Armrest receivers

•  Seat sling

•  Footrest mounts

MAINTENANCE SCHEDULE

Summary of Contents for EVOKE













Reviews: