14
15
www.aidacarelifters.com.au
swift
swift
1.
Position the user so they are facing the Swift Patient Mover with their feet on
the floor.
2. Spread the legs if required and get the user to place their feet on the footplate.
Flip up the Seat Pads and apply the Castor Brakes.
3. The user should grab the Hand Rail with both hands and use this to assist them
with standing.
4. Once the user is fully stood up, the carer should flip down the Seat Pads and user
can then perch on the pads.
5. The carer can then remove the brakes and propel the Swift Patient Mover to
move user to required destination.
7. TRANSFER GUIDE
The Swift Patient Mover can be used to aid a user getting out of bed.
1.
Position the user so they are facing the Swift Patient Mover whilst sitting on the
bed with their feet on the floor.
2. Spread the legs if required and get the user to place their feet on the footplate.
Flip up the Seat Pads and apply the Castor Brakes.
3. The user should grab the Hand Rail with both hands and use this to assist them
with standing.
4. Once the user is fully stood up, the carer should flip down the Seat Pads and user
can then perch on the pads.
5. The carer can then remove the brakes and propel the Swift Patient Mover to move
user to required destination.
Using the Swift Patient Mover with a Bed
1
2
3
4
1
3
2
4
Using the Swift Patient Mover with a Chair
The Swift Patient Mover can be used to aid a user getting out of a chair, commode,
toilet or wheelchair. If used with a wheelchair, then the wheelchair brakes should be
applied and the leg rests removed prior to operation.
