19
FAQ:
Q: Why my dvr camera indicate
“
SD card Full
”
?
A:
1) Please check if your memory card is original brand high speed Class 10
memory card, if you use some copy card like Class 4 or Class 6, it will indicate
“
SD card full
”
because it is not compatible. (Note please: DVR max support only
64GB card only)
2)
Please check your dvr MENU settings if you have opened on Loop Recording
this function already? You must open ON Loop Recording this function the
previous video can be overwriting.
3)
Please check your dvr MENU settings if you have turn OFF G-Sensor, Parking
Monitor & Motion Detect this 3 functions already at the same time? If G-Sensoris
on, the file will be protected to lock that can not be overwrite, also dvr willauto go
to recording all the time if Parking Monitor & Motion Detect is on, so the SD card
will be full.
4)
You must format to clear up your memory card file by hand at least 2~3 times
within a month because the memory card inside will have some locked file that
happen while driving at some emergency time, but this locked files can not be
overwrite automatically. You must delete them byhand.
Q: Why my dvr camera auto on & off continuously?
A:
Please check first if your dvr MENU settings open on Parking Monitor and
G-Sensor this 2 function already? Normally if Parking Monitor is on the dvr willgo to
Parking Monitor mode, in this mode status, dvr will auto on once detectany touch or
shake, then if will auto off if while no touch. So it will auto on &
off continuously.
G-Sensor this function also will lock this status video file to avoid no overwrites
then it can keep as parking evidence. Please turn off this 2 function in MENU
settings then try again.
At the same time, please turn off Motion Detect this function in MENU settings
Автотовари «130»
130.com.ua
