22
23
English
2.7 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Security Override Jumper
(3-pin SEC_OR1)
Descriptor Security
Override
Not override (Default)
OCuLink SATA/PCIE
Interface Selection Jumper
(3-pin OCU_SEL)
For PCIE (Default)
For SATA
CPU PECI Mode Jumper
(3-pin PECI1)
(E3C246D2I / E3C242D2I only)
CPU PECI connected to
PCH
CPU PECI connected to
BMC (Default)
