8
88
88
CAUTION!
1. FSB1600-CPU will operate in overclocking mode. If you use a FSB1600-
CPU on this motherboard, you need to adjust the jumpers. Please refer
to page 26 for proper jumper settings. Besides, if you want to change a
new CPU on this motherboard, please remove the AC power cord from
your PC in advance.
2. About the setting of “Hyper Threading Technology”, please check page
47.
3. This motherboard supports Untied Overclocking Technology. Please read
“Untied Overclocking Technology” on page 42 for details.
4. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 17 for proper
installation.
5. Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
Memory Support Frequency
1600
DDR2 800, DDR2 1066,
DDR3 1066, DDR3 1333
1333
DDR2 667, DDR2 800, DDR2 1066,
DDR3 800, DDR3 1066, DDR3 1333
1066
DDR2 667, DDR2 800, DDR2 1066,
DDR3 800, DDR3 1066
800
DDR2 667, DDR2 800,
DDR3 800
*
DDR2 1066 and DDR3 1333 memory modules will operate in
overclocking mode.
*
When you use a FSB1600-CPU on this motherboard, it will run at
DDR2 960 if you adopt a DDR2 1066 memory module. When you
use a FSB1600-CPU on this motherboard, it will run at DDR3 960
if you adopt a DDR3 1066 memory module. When you use a
FSB1600-CPU on this motherboard, it will run at DDR3 1280 if you
adopt a DDR3 1333 memory module.
*
If you adopt a DDR2 1066 memory module and adopt a FSB1333-
CPU or FSB1066-CPU on this motherboard, you need to adjust the
jumpers. Please refer to page 26 for proper jumper settings.
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
