6 1
6 1
6 1
6 1
6 1
TWR
Use this to adjust TWR values. Configuration options: [Auto], [3CLK], [4CLK],
[5CLK] and [6CLK]. The default value is [Auto].
TWTR
Use this to adjust TWTR values. Configuration options: [Auto], [1CLK], [2CLK]
and [3CLK]. The default value is [Auto].
TRWTTO
This option appears only when you adopt AM2 CPU. Use this to adjust TRWTTD
values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK], [5CLK], [6CLK],
[7CLK], [8CLK] and [9CLK]. The default value is [Auto].
TWRRD
This option appears only when you adopt AM2 CPU. Use this to adjust TWRRD
values. Configuration options: [Auto], [0CLK], [1CLK], [2CLK] and [3CLK].
The default value is [Auto].
TWRWR
This option appears only when you adopt AM2 CPU. Use this to adjust TWRWR
values. Configuration options: [Auto], [1CLK], [2CLK] and [3CLK]. The default
value is [Auto].
TRDRD
This option appears only when you adopt AM2 CPU. Use this to adjust TRWTTD
values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK] and [5CLK].
The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Addr/Cmd Fine Delay
Use this to adjust values for Addr/Cmd Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
CS/ODT Fine Delay
Use this to adjust values for CS/ODT Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same
node, or accross nodes, decreasing access contention.
