background image

5

55

55

1.

1.

1.

1.

1. Introduction

Introduction

Introduction

Introduction

Introduction

Thank you for purchasing ASRock 

A785GXH/128M

 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It de-
livers excellent performance with robust design conforming to ASRock’s commit-
ment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step
guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to
BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well.  ASRock website    http://www.asrock.com
If you require technical support related to this motherboard, please visit
our website for specific information about the model you are using.
www.asrock.com/support/index.asp

1 . 1

1 . 1

1 . 1

1 . 1

1 . 1 PPPPPack

ack

ack

ack

ackage Contents

age Contents

age Contents

age Contents

age Contents

1 x ASRock 

A785GXH/128M

 Motherboard

(ATX Form Factor: 12.0-in x 8.4-in, 30.5 cm x 21.3 cm)

1 x ASRock 

A785GXH/128M

 Quick Installation Guide

2 x ASRock 

A785GXH/128M 

Support CD

1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)
1 x Ribbon Cable for a 3.5-in Floppy Drive
2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield

Summary of Contents for A785GXH 128M






































































Reviews: