14
Use the up or down arrow keys to select your desired
RAID
Level
. You may select RAID 0 (Stripe), RAID 1 (Mirror), RAID
5 or RAID 10 for your RAID level. Press <Enter>, and then you
can select
Strip Size
.
If you selected RAID 0 (Stripe), use the up or down keys to
select the stripe size for your RAID 0 array then press <Enter>.
The available values range from 8 KB to 128 KB. The default
selection is 128 KB. The strip value should be chosen based
on the planned drive usage.
•
8/16 KB - low disk usage
•
64 KB - typical disk usage
•
128 KB - performance disk usage
After you set disk block size, press <Enter> to set disk
Capacity
.
Volume0
Volume0