English
27
TRX40 Taichi
2.5 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is
“Open”.
Clear CMOS Jumper
(CLRCMOS1)
(see p.1, No. 29)
Short: Clear CMOS
Open: Default
CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system setup
parameters. To clear and reset the system parameters to default setup, please
turn off the computer and unplug the power cord, then use a jumper cap to short
the pins on CLRCMOS1 for 3 seconds. Please remember to remove the jumper
cap after clearing the CMOS. If you need to clear the CMOS when you just finish
updating the BIOS, you must boot up the system first, and then shut it down
before you do the clear-CMOS action.
2-pin Jumper
The Clear CMOS Button has the same function as the Clear CMOS jumper.
Summary of Contents for TRX40 TAICHI
Page 4: ......
Page 23: ...English 19 TRX40 Taichi 3 4 ...
Page 25: ...English 21 TRX40 Taichi 7 8 ...
Page 27: ...English 23 TRX40 Taichi 3 4 ...
