11
EN
Instructions
Intended use
Electrical locking devices of doors along escape routes are intended for use in the
commercial sector.
The product has been designed for safeguarding escape routes and has been tested to
the requirements specified in the German guidelines on electrical locking systems for
doors in escape routes (EltVTR) and DIN EN 13637:2015.
Different uses or combinations of devices not described in the approval are not
permitted (“Warranty, disposal”, page 60).
ASSA ABLOY Sicherheitstechnik GmbH
can provide the necessary planning informa-
tion for approved solutions and the device combinations required for your
application. The usage must be coordinated with the requirements of the building
inspectorate. Contact the competent building authority for this purpose.
Compliance with all relevant requirements of the building inspectorate is manda-
tory for use, particularly with respect to the
· coordination of the safety concept with the competent building authority and
· modifications of door elements.
The device is suitable for installation, configuration and use, according to these
instructions. Any use beyond this is deemed to be non-intended use; devices
combinations which are not described are not permitted.