9
EN
Instructions
Safety instructions
Warning!
Danger arising from modification of the product:
The safety features of this
product are an essential requirement for its conformity with EltVTR and DIN EN
13637:2015. Changes other than those described in this manual may not be made.
Danger due to missing Emergency Open button on the escape door:
If the
release of the escape door is centrally controlled, it will no longer be possible to
independently choose to exit the danger zone in the case of danger. This always
requires an approval from the competent building authority. Normally, a con-
stantly manned station equipped with a central release mechanism is prerequi-
site for the approval.
Danger due to faulty commissioning:
In order to ensure the safety of the
product, commissioning must be performed by a qualified person.
ASSA ABLOY
Sicherheitstechnik GmbH
offers training for qualification in the requisite skills.
Danger due to faulty or improperly performed maintenance:
The owner is
responsible for correct installation and functional inspection of the product and
connected components.
· Safe functionality of the mechanical components must be checked
at least
once a month
by the operator or authorised representative.
· The safe function must be tested by a trained qualified expert
at least once per
year
.
· Requirements established by inspection authorities must be complied with.
Danger arising from tampering or improperly performed repairs:
If the device
or parts of the device cannot resume normal operation after a fault or alarm
message, or if there is evidence of damage, the device may only be repaired by a
qualified person. Please contact the customer service of the installation company
or the support department of
ASSA ABLOY Sicherheitstechnik GmbH
.
!
