ASSA AB 702796 Utgåva 1
6 av 6
4.
Install the cylinders according to the mounting
instructions for EL580.
5.
Attach the accessory with four M5 screws and
outside nippels.
NOTE! Use minimum of one 3 mm distance
plate, ASSA 356820, if the B- or C-measure of
the door is less than 22 mm.
6.
Test the function minimum five times. Press
the exit handle. The latch bolt shall then retract
and the door shall be possible to open.
After opening procedure the exit handle shall
easily return to its starting position.
Attach the enclosed after glowing exit label on
the exit handle. The arrow on the label shall
point in the maneuvering direction.
Attach the plastic seal strip if wanted.
