50
FR
Montage
Montage du cylindre de fermeture mécatronique
VERSO CLIQ
®
Longueur de la vis de fixation
Une vis de fixation d’une longueur de 85 mm convient pour des serrures
ayant un axe de fouillot jusqu’à 75 mm. Pour les serrures ayant un axe de
fouillot plus grand, la règle suivante s’applique :
Longueur de la vis de fixation = Axe de fouillot + 10 mm
Montage du c ylindre profilé
Prérequis :
la serrure à mortaiser doit être montée.
Observez le guide d’installation illustré (« Illustrations », page 74). La mo-
dification de la position du panneton est possible comme option sur les cy-
lindres profilés
(
« En option: Modification de la position du panneton », page 75).
1 Insérez le cylindre profilé dans la découpe pour cylindre profilé.
2 Fixez le cylindre profilé avec la vis de fixation.
La vis de fixation fournie convient pour des serrures ayant un axe de
fouillot jusqu’à 50 mm. Pour les serrures ayant un axe de fouillot plus
grand, la règle suivante s’applique :
Longueur de la vis de fixation = Axe de fo 10 mm.
3 Serrez la vis de fixation uniquement à la main.
4 Vérifiez si le cylindre de fermeture fonctionne impeccablement et
avec une souplesse de fonctionnement correcte. Pour ce faire,
actionnez plusieurs fois le cylindre de fermeture avec une clé
compatible valide.
Vous avez monté le cylindre profilé.