7
DL2200 and DL3200 Series
Installation Instructions
Cylindrical Deadbolts
FM331 10/19
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
IC Core Deadbolt Installation (cont .)
c
Install Inside
a. For 12-function lock installation, insert cylinder housing assembly through cylinder housing collar
and with tailpiece going through slot in hub of deadbolt (flat side of cylinder tailpieces meet within
slot). For 13-function and17-function lock installation, place thumbturn assembly onto tailpiece.
b. Align screw holes and fasten with two (2) 1/4-20 mounting screws (remove cylinder from inside SFIC
cylinder housing assembly and turn face plate 90
˚
to expose the mounting holes).
c.
IMPORTANT:
Operate deadbolt from both sides of door to check for proper operation. If binding
occurs, recheck the door preparation and complete the installation procedure.
d
Install Strike
