Installation Instructions
Concealed Vertical Rod
ED5800 (A) Series
Exit Device
FM171 01/19
Copyright © 2012, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Important:
For use with metal doors only.
Device is packed ready for any compatible trim.
Dogging:
Feature to hold bolts retracted and touchpad
depressed for push-pull door operation.
Note: Dogging is not a feature of fire labeled
devices.
To Dog Device
1. Insert dogging key.
2. Hold touchbar depressed.
3. Turn key 1/4 turn clockwise.
Cover
(2) 1/4-20 X 3/4" PRHMS
(Special Head)
(2) #8-32 X 2" PHPMS Temporary Screws
(2) E-Rings
(2) Set Screw
#8-32 UNC
(2) Arm & Bracket Assembly
(2) Yoke Pin
8’ (2.44m) Opening
7’6” (2.29m) Opening
7’ (2.13m) Opening
7’2” (2.18m) Opening
Top Tube
Top Latch
Strike
Strike Plate
Shim (2) Supplied
(3) 10-24 x 3/4" PFHMS
(6) 10-24 x 1/2" PFHMS
Top Rod
(5) Cotter Pin
Bottom Rod Assembly
Deadbolt
Bottom Bolt Case
(6) 10-24 x 1/2" PFHMS
Strike
2) 8-32 x 5/16" PUFHMS
(3) 8-32 x 5/16"
PUFHMS
(2) 1/4-20 X 3/4" PRHMS
End Clamp
End Cap
Hole Plug
(Fire Devices)
Dogging
Key
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information go
to www.P65warnings.ca.gov.
