33
Information
EN
Safety instructions
Warning!
Diminished fire protection function may result in personal injury and property damage:
Fire doors
prevent fire from spreading and are tested as a complete unit with accessories:
· regulations established by inspection authorities must be complied with,
· Check whether the door certification matches the lock.
· The door manufacturer needs to be consulted if the lock is to be replaced and a different model used or
a lock is to be retrofit. Specifications of the door manufacturer must also be observed.
· The installed lock must be the appropriate size.
Danger resulting from damage:
A damaged device is a safety risk and may not be commissioned. Check
the packaging and the device for damage. Damaged cables and connector assemblies must not be used
either.
At tention!
Property damage from work on the door leaf:
The lock must be removed for any work on the door leaf,
such as drilling or cutting.
Impaired function due to incorrect rebate gap:
The rebate gap must be appropriately adjusted (“Expla-
nation of terms”, page 38 and “Technical data”, page 47).
Property damage due to unsuitable striking plate:
Select the striking plate so that it always acts as the
stop face and sliding surface for the latch.
Property damage due to improper handling during transport:
The door leaf may not be lifted or carried
by the door handles.
Property damage from opening the lock:
Open the lock will damage it and void the warranty (“Warran-
ty”, page 53).
Property damage from painting.
Do not paint the lock or striking plate, or coat either with other sub-
stances.
Protect against water and moisture:
The
security lock 309
must be protected against penetrating water.
Water impairs the function of the
security lock 309
.
!
A
