10
EN
Notes
Attention!
An electronically controlled door in the escape route must be identified:
A
sign (pictogram) in accordance with EltVTR must be affixed on the inside of an
electronically controlled door in the escape route (Fig. 3). This sign must be af-
fixed for identification of the Emergency Open push-button.
Fig. 3 :
Pictogram in
accordance
with EltVTR
EMERGENCY BUTTON
Only actuate in case of danger
Intended use
Electrical locking devices of doors along escape routes are intended for use in
commercial applications.
The product has been designed for the safeguarding of escape routes and has
been tested according to the requirements of EltVTR. Deviating uses or device
combinations not described in the approval are not permitted.
ASSA ABLOY Sicherheitstechnik GmbH
can provide the necessary planning informa-
tion for approved solutions and the devices combinations required for your appli-
cation. The usage must be coordinated with the requirements of the inspection
authorities. Please contact the responsible inspection authority for this purpose.
Compliance with all relevant inspection authority requirements is mandatory for
the use, particularly with respect to the
· coordination of the safety concept with the responsible inspection authority and
· modifications of door elements.
The device is suitable for installation, configuration and use, according to these
instructions. Any use beyond this is deemed as non-intended use; devices combi-
nations which are not described are not permitted.
A
