Assa Abloy Lockwood 002 DX, Service Manual

The global leader in door opening solutions

ASSA ABLOY Australia Limited, 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2012

13

530 DX SERIES

DIGITAL ENTRANCE SET

2. Install digital lock and interior furniture plate.

(a) Fit rubber seal to the back of the digital lock and

     interior furniture plate.

(b) Insert blade end of spindle in vertical position into

     digital lock drive gear.

(c) Install digital lock and interior furniture plate to door

     with both turn knobs in vertical position.

     NOTE: Ensure that spindle engages latch hub and 

     interior furniture plate drive gear.

(d) Secure using two metal thread mounting screws.

10000-221_30621-0504

Latch

hub

Door

Latch

Latch mounting screws

Interior furniture

plate

Metal thread

mounting screws

Seal

Seal

Spindle

Digital lock

Latch mounting screws

Door

Latch

Seal

Seal

Door

Interior furniture

plate drive gear

lock drive gear

Blade end

of spindle

Metal thread

mounting screws

530 DX SERIES

DIGITAL ENTRANCE SET

Strike

Jamb

Half door thickness

Latch mounting screws

3. Prepare jamb and install strike.

(a) Mark strike location on jamb edge directly opposite

     latch as shown.

(b) Locate strike on jamb edge centrally about 

     horizontal centreline with screw holes in strike on

     vertical centreline. Mark outline of strike and bolt

     hole onto jamb edge.

(c) Mortice in the following sequence:

1. Bolt hole mortice 16mm (     ") deep.

2. Strike mortice 1.5mm (     ") deep.

(d) Pre-drill 2.5mm (     ") to accept mounting screws

      and secure using woodscrews supplied.

5

8

1

16

3

32

3

PREPARE AND INSTALL

2

INSTALL LOCK

1

1. Prepare door and install latch.

(a) Mark and drill holes as shown on template.

(b) Insert latch into hole in door edge and scribe around faceplate.

(c) Mortice 4mm (     ") deep to accept latch faceplate.

(d) Pre-drill 2.5mm (     ") to accept mounting screws and secure 

     latch using woodscrews supplied.

5

32

3

32

Lock mounting position.

This product is more convenient to operate at approximately
chest level, but door construction may restrict the mounting position.

SOLID DOORS: 

Permit mounting at any height.

HOLLOW CORE DOORS: 

Mounting may be restricted by the

size and position of the timber block within the door for lock mounting.

Note: For fire door applications, keypad must be fitted 
          without rubber mounting pad.

FOLLOW INSTRUCTIONS CAREFULLY

INSTALL LOCK

LOCK MOUNTING POSITION