Patent: NZ 556113
077188 Sept12
6. Latch Reversal
• Turn key to lock latch
• Undo the M4 latch screw
• Reverse the latch as desired
• Refasten the M4 latch screw to secure the latch
• Insert the latch wear pad
Note:
2mm Latch Packer is provided to allow for latch
projection adjustment. An additional 2mm packer is
available for purchase.
LOCKWOOD GUARANTEE
M4 Latch Screw
Latch Wear Pad
Latch
2mm Latch
Packer
7. Lock operation
Deadlocking Operation
• Pull the door shut. The door will self-latch
• Turn the key towards the edge of the door to deadlock
• The door is now secure from exterior and interior
Opening Operation
• Turn the key away from the door edge to deactivate the deadlock
• Push the handle down to retract the latch
Deadbolt
Latch
Handle
Troubleshooting
Do I need to tap holes?
No. All screws are self tapping.
The furniture screws do not
tighten
Ensure the screws line up with the screw
boss on the exterior handle.
Do I have to use the supplied
screws?
For best performance, it is recommended
that only the supplied screws are used.
The key function does not
operate
Ensure the motion of the latch is not
restricted.
Turn key
to throw
deadbolt
ASSA ABLOY New Zealand Limited
6 Armstrong Road, Albany, Auckland 0632
info.nz@assaabloy.com
www.assaabloy.co.nz
ASSA ABLOY Australia Pty Limited
235 Huntingdale Road, Oakleigh, Vic 3166
info.au@assaabloy.com
www.assaabloy.com.au
