2
General Description
BC-Prefix Option
The BC prefix for 57- indicates that the unit has been programmed to comply with the section of the BOCA code
relating to delayed egress.
BOCA allows for automatic reset of the delayed egress unit. Under BOCA, the unit can automatically reset thirty (30)
seconds after the door has been cycled. If the door is opened any time during the thirty (30) seconds, the timer in the unit
resets and waits another thirty (30) seconds before rearming. This requires a door position switch.
Note: If a door position switch is not used (Blue wire connected to Black wire), the unit will automatically reset in
30 seconds.
There are no user serviceable parts on the 57- PCB module assembly.
Electrical Specifications
The SARGENT 57-Delayed Egress Exit Device is designed to work with an external electromagnetic lock in
areas that require a delayed egress which alarms at the door when any attempt is made to violate the door.
The 57- device can be tied into a fire alarm system.
NOTE:
Proper connections and appropriate peripheral hardware are required.
All components must be installed according to prevailing electrical codes.
• Input Voltage: 24VDC +/- 15% (20.4 - 27.6VDC) regulated/filtered
• Power Consumption @ 24VDC (with 1584 Electromagnet):
•
60 mA (typical) Disarmed;
•
220 mA (typical, unloaded) Armed;
•
250 mA (typical) Delayed Egress Mode;
•
375 mA (max, loaded) with Optional Features
• Operating Temp: 0°C to 49°C (32°F to 120°F)
• Maximum Electromagnetic Lock load: 275mA. If desired load exceeds this limit, an external relay mod-
ule may be used.
Part No.
Description
52-4830
PCB Module Replacement Pack - Standard
52-4831
PCB Module Replacement Pack - BOCA (BC prefix)
Consult factory
Rail Assembly
Consult factory
Chassis Assembly
Consult factory
Insert Assembly
Consult factory
Chassis Cover
Parts Breakdown
3
Chassis
Cover
Insert
Assembly
Chassis
assembly
PCB Module
Assembly
Rail Assembly
4 1-800-810-WIRE • www.sargentlock.com • A7743E
Copyright © 2016, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
02/29/16
Delayed Egress 57- 80 Series Exit Device