7
7300 Series
Installation Instructions
Multi-Point Lock
A8270A 02/20
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
3 Installation
(cont.)
d
Install Center Strike into Door Frame
• Install two (2) ¼-20 socket cap flat head screws.
(Figure 3)
e
Remove Retractor Inserts
WARNING
The door now has the ability to latch.
(Figure 4)
f
Check Latches (uninstalled)
• Insert the uninstalled outside mortise trim and
rotate to verify the top and bottom latches
retract flush with the door. Do not install
mortise trim at this time.
(Figure 5)
• Move the top strike back and forth until the top latch engages the strike.
(Figure 6)
Figure 3
Figure 4
Figure 5
TOP OF DOOR FRAME
Figure 6
