04/30/21
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
IN120 / IN220 Exit Device
1-800-810-WIRE • www.sargentlock.com • A8185D
15
NOTE: Exit chassis harness consists of a 6-pin female connector and two
different-sized ground lugs (Fig. 3A)
1. Feed 6-pin connector and
larger
ground lug straight through to outside of
door (Fig. 3A, B) while feeding smaller ground lug into wire hole, up through
wire channel and out through inside of door (Fig. 3C).
DO NOT PINCH THE WIRE HARNESS.
2. Begin to secure the exit chassis with through bolts
to the ET trim using (2) 1/4 -20 x 2-3/8”
flat head machine screws.
3 Mount Exit Device Chassis
Fig. 3B
Outside of
Door
Inside of Door
Fig. 3C
Inside of Door
(2) 1/4 x 2-3/8”
Flathead Machine
Screws (secures ET)
Exit Chassis
Fig. 3A
