1-800-810-WIRE • www.sargentlock.com • A8185D
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
04/30/21
IN120 / IN220 Exit Device
20
Door Position
Switch Hole
Fig. 2B
Wood doors have 3/8” raceway to controller cutout and metal doors
have 3/4” raceway to the controller cutout.
Refer to template A8215.
1. Insert connector end of DPS through the raceway on the latch edge of
the door (Fig. 2A).
Note: For metal doors, use DPS Collar.
2. Push DPS firmly into place by hand.
IMPORTANT
: DO NOT TAP SWITCH WITH ANY TOOL.
Wood Frame
Metal Frame
Dim 1
3/8”
3/4”
Horizontal
of Strike
Vertical
of Strike
Dim 2
(From template)
Dim 1
2 Install Door Position Switch (DPS)
DPS
(Door Position
Switch)
Collar is used only
with metal doors
Door Frame
DPS
(Door Position
Switch)
Fig. 2A