1-800-810-WIRE • www.sargentlock.com • A8185D
Copyright © 2016, 2019, 2021, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
04/30/21
IN120 / IN220 Exit Device
4
Regulatory and Power Specifications
2
The system shall not be installed in the fail-secure mode unless permitted by the local authority having jurisdiction
and shall not interfere with the operation of Listed panic hardware.
IN220 (PoE version):
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical
Code (CEC), Part I, Safety Standard for Electrical Installations, local codes and the authorities having jurisdiction.
This product is not intended for outside wiring as covered by Article 800 in the National Electrical Code, NFPA 70.
• Battery Power:
Alkaline AA Batteries (6): 9V, 300mA
(To comply with “Fire Listed” doors, batteries must be replaced with alkaline batteries only)
• Optional Hard Power (UL 294 Listed Power Supply Required):
9-24VDC, 300mA
• UL 294 Access Control Ratings
:
Destructive Attack
Level 1
Line Security
Level 1
Endurance
Level 4
Standby Power
Level 1
• UL Listed - UL 294 Indoor Use
• CUL Listed - ULC-60839-11-1, Grade 1
!
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294/B.
I
N120 (Wi-Fi version):
For Mobile Credential-Enabled versions of this electronic lock
(Indicated by the credential code in the product order string):
• Mobile Credentials are transmitted to the lock via Bluetooth Smart or NFC ISO/IEC14443 and must use
a mobile device enabled with these technologies.
• Credential and mobile device versions are specified by the credential provider.
• User must acquire the latest HID “Mobile Access” application available from Apple iStore or Android PlayStore.
Power Supply Specifications
Electronic Authentication Specifications (Mobile Credentials)
• Power over Ethernet:
Use UL 294 Listed, PoE Injector or Class 2 power limited power supply (55VDC, 90mA)
• UL testing was conducted on product powered by UL listed model POE20U-560(G) PoE Injector,
manufactured by Phihong
