Copyright © 2020, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
05/31/20
SE LP10 Mortise Lock
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
16
A. Connect 6-pin connector from lock body to 6-pin connector on reader harness (Fig. 8A).
B. Connect 2-pin connector from lock body to 2-pin connector on reader harness (Fig. 8A).
Fig. 8A
NOTE: Neatly fold excess wires into remaining space to prevent pinching
wires when mounting inside escutcheon (Fig. 8C).
Fig. 8B
SE LP10
Harness
8-pin
ElectroLynx
4-pin
ElectroLynx
8 Wire Connections
D. Connect ElectroLynx 4- and 8-pin connectors from the door harness to
(black) 4- and 8-pin connectors of the SE LP10 harness (Fig. 8B).
C. Carefully tuck connected harnesses into one-inch hole in door (Fig. 8C).
Fig. 8C
Do not offset connectors and ensure that they are completely seated.