Copyright © 2020, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
05/31/20
SE LP10 Mortise Lock
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
20
For 82280-82283 & 82270-82273 Function mortise locks with cylinders:
A. Insert key into cylinder and rotate: There should be no friction against lock case, wire harness
or any other obstructions.
B. The key will retract the latch: Key should rotate freely.
C. When the deadbolt is thrown: Ensure that the key retracts both the deadbolt and the latch.
D. Inside lever: When used, ensure it retracts both the latch and deadbolt (if provided).
E. Close door: Ensure latch and deadbolt fully extend and do not bind.
Operational Check
8
Feature
WT1
WT2
12 or 24VDC solenoid lock
voltage adjustable
X
X
Operates as Fail Safe or
Fail Secure
X
X
"Learn" mode allows testing
of specific cards without
programming at panel level
X
X
Card reader data integrity is
validated at test unit
X
X
Displays detailed Wiegand
data, including hexadecimal
string and total bits received
X
Displays measured end-of-line
resistor values (if applicable)
X
The ASSA ABLOY Wiegand Test Unit verifies your installation in
the field*. The test unit checks for proper wiring, card reader data
integrity, lock functionality including lock/unlock, door position
status, and request-to-exit (REX) status.
In addition, this tool provides product demonstration abilities to
highlight the product’s features and capabilities.
Wiegand Test Unit
*For directions on use, see operating
instructions provided with unit.
