Copyright © 2020, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
05/31/20
SE LP10 Mortise Lock
A8113H • 800-810-WIRE (9473) • www.sargentlock.com
4
The SARGENT SE LP10 brings flexibility to our Integrated Wired access control solutions.
Featuring multiCLASS SE
®
Technology from HID Global
®
, the SE LP10 is ideal for mixed
credential environments and enables easy migration to higher security credentials and
mobile access.
Backed by SARGENT’s Grade 1 hardware, the SE LP10 mortise lock features Request to Exit
(RX) and Door Position (DPS) monitoring inside the lock body and is available in 12 or 24VDC.
The SE LP10 reader provides visual (LED) and audible indicators of lock state (locked/unlocked).
• Latch - Stainless steel 3⁄4” projection one-piece
• Deadbolt - One-piece hardened stainless steel
• Guardbolt - Stainless steel, non-handed
• Handing - Easily field reversible without opening case
• Case - 12 gauge heavy duty wrought steel
• Outside lever controlled by compatible credential
• Inside lever provides RX signal and retracts latch
and deadbolt
• Field-selectable to Fail Safe or Fail Secure*
• Complete monitoring of door includes request
to exit and door position monitoring with
optional end-of-line resistors
• UL and CUL listed for use on Fire Doors
• Listed to UL 294 (Access Control System
Units) within the U.S. only**
• Door position switch (DPS) within lock body
• Locks furnished for 1-3/4” doors. Other door
thicknesses require confirmation with factory.
• Wires directly to EAC Panels
General Description
3
Specifications / Features
4
*WARNING
: The system shall not be installed in the fail-secure mode unless permitted by the local authority having
jurisdiction and shall not interfere with the operation of Listed panic hardware.
Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL294/B.
• Supports multiple credential formats:
•
125 kHz credential compatibilty
:
•
HID Prox®, AWID, EM4102
•
13.56 MHz credential compatibility:
• 2.4 GHz credential compatibility
• Secure Identity Object
™
(SIO) on Mobile IDs (Bluetooth Smart)
• Secure Identity Object™ (SIO) on iCLASS Seos, iCLASS SE/SR,
MIFARE DESFire EV1/EV2 and MIFARE Classic (on by default)
• Standard iCLASS Access Control Application, ISO14443A (MIFARE)
CSN, ISO14443B CSN, and ISO15693 CSN
• ISO14443A/B (PIV-compatible Transparent FASC-N read) available
with SE LP10-F (**not available with Alternate Indicator Configuration)
• NFC-enabled mobile phones
For Mobile Credential-Enabled versions of this electronic lock
(Indicated by “BIPS” in the product order string):
• Mobile Credentials are transmitted to the lock via Bluetooth Smart or NFC ISO/IEC14443 and
must use a mobile device enabled with these technologies.
• Credential and mobile device versions are specified by the credential provider.
• User must acquire the latest HID “Mobile Access” application available from Apple iStore or
Android PlayStore.
**not available with Alternate Indicator Configuration