03/31/15
1-800-810-WIRE • www.sargentlock.com •
A7786G
15
Copyright © 2015, Sargent Manufacturing Company
, an ASSA ABLOY Group company
. All rights reser
ved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Profile Series v.S2 WiFi Mortise Lock
*IMPORTANT:
Batteries are optional if controller is powered
by external power supply.
1. To install or replace batteries, first remove the battery
cover (if necessary) using the provided security tool.
2. Unscrew the bottom screw of the battery keeper
and remove the battery keeper, being careful
not to break the tabs at top that hold it in
place (Fig.11A)
3. Place (6) “AA” alkaline batteries in the
compartment, being careful to align
polarity properly (Fig. 11B).
4. Replace battery keeper being careful to engage
tabs at top to hold it in place.
5. Attach battery cover to inside escutcheon,
making sure to line up tabs with retaining
slots in battery cover (Fig. 11C).
6. Secure with the security screw
using provided tool. (Fig. 11A).
Security Tool
(01-029)
Battery
Cover
Security
Screw
Battery
Keeper
11 – Install and Remove Batteries*
Fig. 11A
+
-
+
+
-
+
Fig. 11B
Fig. 11C
Tabs
Retaining
Slots
Install and Remove
Batteries
Scan to see a video of this
installation step.
