P/N YRD256-MNL-0003 Rev G
18
Setting Definitions
*The Master Entry Code must be created prior to any other programming of the lock.
Creation
required*
Inside Indicator Light
Disabled (Off)
Master Entry Code
Auto Re-lock
Disabled
Privacy Button
Disabled
The Master Entry Code is used for programming
and feature settings. It must be created prior to
programming the lock. The Master Entry Code will also
operate (unlock/lock) the lock.
After a successful code entry or manual unlock
with the key, the lock will automatically re-lock after
each unlock in an effort to keep your home secure.
This feature is optional, and can be turned off.
When enabled, the lock will automatically re-lock
after thirty (30) seconds.
Located on the inside lock. Shows active status
(Locked) of lock and can be enabled or disabled in
Advanced Lock Settings (Main Menu selection #3).
Privacy mode is disabled by default. When enabled,
activate Privacy mode by pressing the privacy button for
4 seconds to put the lock in do-not-disturb mode (all
Entry Codes are disabled).
Wrong Code
Entry Limit
5 Times
After five (5) unsuccessful attempts at entering a
valid Entry Code, the lock will shut down and not
allow operation for sixty (60) seconds.
Settings
Default Setting
Definition
One Touch Locking
Enabled
When the latch is retracted, activating the keypad
will extend the latch (during Auto Re-lock duration
or when Auto Re-lock is disabled). When One-Touch
Re-lock is not in use (disabled), any valid Entry Code
will re-lock the lock.
Volume
Enabled (Low)
The volume setting for Entry Code verification is set
to Low (2) by default; otherwise it can be set to
High (1) or Silent (3) for quiet areas.
Language
English
Choosing English (1), Spanish (2) or French (3)
becomes the (default) setting for the lock voice
prompts.
All Code Lockout
Disabled
This feature is enabled by the Master Entry Code.
When enabled, it restricts all Entry Code access
(except Master). When attempting to enter a
code while the lock is in All Code Lockout, the RED
locked padlock will appear on the screen.
Shutdown Time
60 Seconds
The lock will shutdown (flashing RED) for sixty
(60) seconds and not allow operation after the
wrong code entry limit (5 attempts) has been met.
