An ASSA ABLOY Group brand
80-9086-0050-010 (10-12)
12
Tighten cylinder
thru this hole.
1. Align the cylinder face to desired
orientation and tighted the cylinder thru
the hole indicatied above.
2. Securely fasten the lockbody screws.
3. Install the armor front with the 2
#10 x 21 5/16" screws provided.
4. Fasten battery cover screw.
IV-F Tightening the cylinder (if needed) and installing the armor front
2
4
1
3
9VDC
Power input
784
(9 Volt Power
Supply)
Hardwiring
Harnesses
Normally Open
Momentary Switch
NO
C
Remote Entry Input
P/n: 14-5496-0212
Section V WIRING DIAGRAM
V-A Wiring diagram
Keypad connector
Lockbody motor