An ASSA ABLOY Group brand
80-9086-0050-010 (10-12)
13
Centerline
of spindle
1 3/4"
1 1/4"
Ø 1-1/16
X 4.5 DEEP
˝
Centerline
of lockbody
IV-G Template for drilling a mortise pocket on the
edge of the door
Finish Care
This lockset is designed to provide the highest
standard of product quality and performance.
Care should be taken to insure a long-lasting
finish. When cleaning is required use a soft,
damp cloth. Using lacquer thinner, caustic
soaps, abrasive cleaners or polishes could
damage the coating and result in tarnishing.
If installation instructions are not followed this may result in damage to
the lock and void the factory warranty. Removing cover screws voids
lock body warranty. Any retrofit or other field modification to a fire rated
opening can potentially impact the fire rating of the opening, and Yale
Locks & Hardware makes no representations or warranties concerning
what such impact may be in any specific situation. When retrofitting
any portion of an existing fire rated opening, or specifying and
installing a new fire-rated opening, please consult with a code
specialist or local code official (Authority Having Jurisdiction) to ensure
compliance with all applicable codes and ratings.
Yale® and eBoss® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their
respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.
Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.
Copyright © 2005, 2012 Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Product Support Tel 800.
• www.yalelocks.com
810.WIRE (9473)
Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.