Installation
Operation Note
Enrolling Fingerprint User
4
6
6
Deleting Fingerprint User
Enrolling Code User
Deleting Code User
7
8
9
Enrolling Card User
Deleting Card User
Unlocking
9
9
10
Change Batteries
Reset
Extension Functions
11
11
12
Solutions for Common Error
Template
13
14
CONTENTS
YDME - 90 Essential Series
Important Tips
1.
The factory default master code is
. Please change the master code on the
initial use. After the master code is changed, all the exist users are deleted automatically.
2.
Carefully keep the override key, take one override key with you and put the spare key
in your office or car in case of power failure of door lock.
3.
Sound definitions: one short beep indicates a sound of key pressing; one long beep
indicates a successful operation; two short beeps(three times) indicates this user is exist;
three short beeps indicates a failed operation; four very short beeps indicates low voltage
or full storage.
4.
If a code is wrongly input for 3 times, the keypad is shut down for 10s.
5.
The lock can store 37 fingerprint users, 78 code users and 30 card users.
6.
A user ID is a random 3-digit number(0-9); a user code is a random 8-digi number
(0-9); the user ID of master code is 888; a user without user ID or wrong user ID will
show 999.Other users can not use the two user ID.
7.
Don't use corrosive cleaner liquid on lock surface. Clean it with furniture spray wax
in time.
“11111111”
8.
Ensure the fingerprint core is put on the fingerprint scanner
during the enrollment and verification.
When placing your finger on the scanner, make sure the fingerprint
core is directly touching the scanner.
To wash your hands will improve your fingerprint accuracy
on the scanner.
Choose the best finger when enrolling or verifying your
fingerprint. Clear, clean and without scars.
Summary of Contents for Yale Essential Series
Page 1: ...Essential Series YDME 90 ...