8
An ASSA ABLOY Group brand
P/N AYRD210-INST-FUL Rev E
8. Install inside escutcheon on inside mounting plate.
Note the horizontal orientation of the tailpiece (Fig. 7)
as you insert the inside escutcheon (thumbturn should
be vertical).
9. Install and secure using (3) M4 x 8mm [8-32 x 5/16"]
pan head screws through the inside escutcheon into
the mounting plate (Fig. 8).
Figure 7
IMPORTANT: Before installing the batteries, test
the mechanical operation of the lock by using
both thumbturn and the key. The movement of the
bolt should be smooth and unobstructed. If
operation is not smooth, review the previous steps
to ensure proper installation.
Figure 9
(4) AA Batteries
Battery Cover
Figure 8
(3) Pan head
screws
10. Insert four (4) AA alkaline batteries. The lock responds
with a series of beeps, a red/blue flash and a quick flash
of all keypad LEDs. When activating the lock for the
first time, the lock will adjust for proper handing.
11. Install battery cover and tighten Phillips head screw.
NOTES: The bolt must be in a retracted (unlocked) position
prior to installing the batteries.
Refer to programming instructions prior to completion of
the next step (Step 10).
