11
An ASSA ABLOY Group brand
P/N AYRD220-INST-FUL Rev B
User Codes can only be programmed through the Master PIN Code*.
1. Touch the screen with the back of your hand or fingers to activate .
2. Enter the 4-8 digit Master PIN code followed by the key.
Lock Response: “Menu mode, enter number, press the key to continue.”
3. Enter “2” followed by the key.
4. Enter “1” followed by the key.
5. Enter the User Number to be registered (1-25) followed by the key.
6. Enter a 4-8 digit PIN code for the User number followed by the key.
7. To continue adding users press the key.
8. Press the key to complete the process and conclude the programming session.
Set Up User Codes
Note: When registering User codes, the code must be entered within 20 seconds or
time expires, Lock Response: “Time expired”, no codes are registered and the process
must be re-started.
3
Press the key
to confirm the
selection.
Enter PIN code.
2
1
Touch lock with
back of hand or
fingers to activate.
PIN code structure
Maximum number of user codes is 250 with Network Module; without Network Module,
maximum is 25 user codes
Open Door with PIN Code
LockoutisaMenufeature(6)thatrestrictsPincodeaccess(exceptMaster).
Privacymodeissetbypressingandholdingthebutton(foundbelowthumbturn)fora
durationoffourbeeps.Thisdeactivatesthekeypadandsound,andbecauseitissetfrom
theinside,providesasecureandsilentlockfortheconvenienceoftheoccupant(s).
Privacy Mode vs. All Code Lockout Mode
*Master pin code must be changed from the default before User codes can be added.
