FIRST STEPS
POWER CLEAN GO 1100SS OWNER’S MANUAL
4
RECEIVING YOUR PRESSURE
WASHER
Damage:
Check for damage in shipping. Report any
damage to the shipping carton or contents to the
freight carrier. File a claim with the carrier within ten
(10) days. Spray Master Technologies is not responsible
for damage to the equipment caused by the freight
carrier.
Package Contents:
Carefully check the contents of
the shipping cartons to ensure the contents match
with the packing list. Please call our Customer Service
Department if items are missing at
1-800-548-3373
or
1-479-636-5776
.
SAVE THESE INSTRUCTIONS!
This manual should be considered a permanent part of the machine and should remain with it. When
ordering parts, please specify model and serial number. Use only identical replacement parts. This
machine is to be used only by trained operators.
PRESSURE WASHER
UTILITY REQUIREMENTS
WATER
Flow Rate:
Minimum 5 GPM
Pressure:
30 PSI min. to 80 PSI max.
Temperature:
150° F max, 65.5° C
ELECTRICAL
Power Clean Go 1100SS:
120V, 60Hz @ 20AMP
RETURNING YOUR PRESSURE
WASHER
Any item returned for warranty or for credit must have
a Returned Authorization Number. Call our Customer
Service Department to discuss your return request.
Please note that all items returned must be F.O.B.
Rogers, Arkansas. No collect or C.O.D. shipments will
be accepted unless prior arrangements have been made
with Customer Service. A restocking fee may be applied
to the items returned for credit that are not under
warranty.
WHAT TO DO FOR SERVICE
If a problem occurs, first refer to the
Power Clean Go
1100SS
Service Manual
in the
“Trouble Shooting and
Diagnostics”
section starting on page 38.
MODEL IDENTIFICATION
The model and serial numbers will be found on a decal on
the pressure washer. Please record these along with date
of purchase for future reference.
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
SERVICE PHONE
1-800-548-3373
