Assistant AP-710, User Manual

Y O U R   S U C C E S S   I S   O U R   C O N C E R N !

.

р

 5

CONNECTING TO PC AND TRANSFERING DATA

MEMORY CARD

Tips to  extend battery life:

1. New battery will be its best condition after 2-3 full charging and discharging.

2. Streaming audio or video apps use a lot of battery life. 

3. Disable wireless network positioning.

4. Switch off Wi-Fi if you’re not close to a strong Wi-Fi signal for extended periods

of time.

5. Use a quick screen timeout. 

6. Reduce brightness to a comfortable level.

7. Widgets that access

Web consume more power than widgets that do not.

Note:

Do not use other adaptors to charge  the Tablet which can cause damage to 

the battery.

When unit is connected to PC via USB cable, the USB-icon appears at the 

 status

bar. S . 

  elect 

USB connected

, then

Turn on USB

-

storage

dialog

appears.

Press

OK.

To remove the tablet safely, tap 

Turn off USB storage

.

Transferring contents from computer:

•

 To import contents into device, connect it to PC via supplied USB cable.

• Upon successful connection to PC, turn to the device, touch and hold the USB 

connection icon on status bar, drag downwards to display an ongoing list.

• 

Select 

USB connected

, then press  on 

Turn

on

USB storage

 to enter USB

mode and all operation will be halted.

• Go to [My Computer], double click on the device

’s disk to open.

• Perform normal file management oper

ation like other USB device.

Insert the card correctly with the contact pin. Pushing the card in you should hear

a click when the card is seated correctly. You may damage card and the device

if 

M

icroSD card is not inserted correctly. To remove 

M

icro SD card push the card

once again until it clicks. 

• 

When a 

M

icro SD card is inserted in or ejected from the device it may take few

seconds for the device to update the content. Please avoid inserting or ejecting

card when other operation is running as this may cause the system hang.

• 

Do not remove the card if the content inside the card is being played. This will

halt the operation of the device and cause the device to restart.

• If the system is not responding press the button [Reset].