22
How do I set up Mercury’s remote controls?
Click the
Setup
button in the Mercury Control
Panel (see page 11), then click on the
Remote Control
tab.
Click the
Add
button to add a room. Type a
name for the room in the small window that
opens.
Highlight the room name at the left and click
the
Add Device
button.
Before you use the Mercury Remote Control for the first time, you will need to set up the remote control
codes for the particular television, VCR, cable system, DVD player, or satellite system you have. You can set
up multiple rooms, each with different devices.
1
2
3
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
4
5
○
○
○
○
○
○
○
○
○
○
In the window that opens, select a device type
from the left column, then choose the manu-
facturer of that device from the second column.
Aim the infrared transmitter (on the top of the
Mercury) at the device and click the
Try Code
button. The correct code will turn the device on
or off. If the first code does not work, press the
Try Next Code
button, testing each code
sequentially until you find the one that turns
your device on or off.
