11
:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 1
:: Front Gearbox Build - Bag 5.1, 5.2, 5.3 - Step 2
:: Steering / Chassis Build - Bag 4.1 - Step 4
25201
3x8mm
FHCS
81517
Steering
Bellcrank
Nut
x2
x2
#1596
thread lock
81518
Steering
Rack
89221
5x4mm
Set Screw
81510
Gearbox,
(Inboard)
81510
Dust Cap
91559
6x13x5mm
Flanged
Bearing
81564
Dogbone
Outdrive,
Front
4675
2.5x6mm
FHCS
81009
Diff Pinion
Gear, 12T
x2
#1596
thread lock
25620
3x10mm
SHCS
81381
Diff Shim
13.5x15.8x0.20mm
x2
81510
Gearbox,
(Outboard)
STEP 1
STEP 2
81510
Anti-Roll
Bar Cap
!
!
Step 1:
Add shims on the ring gear
side to TIGHTEN gear mesh.
Subtract shims on this side
to LOOSEN gear mesh.
NOTE:
Start 1x Thick 0.2mm
Step 2:
Add or subtract shims here
to finalize diff side to side
play once gear mesh is
set from Step 1.
Recommended diff “side-to-
side” clearance (gearbox
assembly) 0.10 - 0.25mm.
Start with 1 x 0.1mm.
Note:
0.1mm shim can be used for
fine tuning of gear mesh
#6588
black grease
Summary of Contents for 80945
Page 1: ...AssociatedElectrics com ...
Page 30: ......