17
:: Wheels / Tires and Body - Bag K - Step 3
:: Wheels / Tires and Body - Bag K - Step 4
Painting Tips:
Your B5 Team Kit comes with a clear polycarbonate
body. You will need to prep the body before you can
paint it. Wash the inside thoroughly with warm water
and liquid detergent. Dry the body using a clean, soft,
lint-free cloth. Use the supplied window masks to
cover the windows from the INSIDE of the body
(RC cars get painted from the inside). Using high
quality masking tape, apply tape to the inside of the
body to create a design. Spray (use either rattle can
or airbrush) the paint on the inside of the body
(prefferably dark colors first, lighter colors last).
NOTE: ONLY use paint that is recommended for use
with (polycarbonate) plastics. If you do not, you can
destroy the plastic body!!!!.
After paint has completely dried, cut the body along
the trim lines. Make sure to drill or use a body reamer
to make the holes for the body mounts and antenna!
Racers Tip:
Instead of using the included body clips
(#21173), you can use hook and loop tape
on the inside of the body, and the sides of
the chassis to keep your body in place!
21173
Small
Body Clips
91470
Clear
Body, B5
91433
Wing Angle
Shim
91471
Clear Wing,
B5
x2
21173
Small
Body Clips
x2
:: Wheels / Tires and Body - Bag K - Step 2
Build 2 (1 left, 1 right)
Build 2 (1 left, 1 right)
91148
M4 Locknut,
with flange
and knurl
91148
M4 Locknut,
with flange
and knurl
Summary of Contents for rc10b5
Page 1: ......
