Associated B64 CLUB RACER, User Manual

2

:: Introduction

:: KIT Features

:: Other Helpful Items

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

http://www.TeamAssociated.com    ·    http://www.RC10.com    ·    http://twitter.com/Team_Associated    ·    www.facebook.com/Team Associated

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

Thank you for purchasing this Team Associated product.  This assembly manual contains instructions and 
tips for building and maintaining your new RC10 B64 CR.  Please take a moment to read through this 
manual to help familiarize yourself with these steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly 
different than in the illustrations.  New parts will be noted on supplementary sheets located in the 
appropriate parts bags.  Check each bag for these sheets before you start to build.

•  Lightweight, hard anodized aluminum chassis with centralized mass 

•  Graphite front and rear shock towers with multiple mounting positions

•  3 gear differentials with lightweight internal gears

•  Rear Anti-Roll Bar Included

•  Rear hubs feature large bearings and the easy-insert system to adjust camber link position and 
    rear axle height

•  V2 12mm “Big Bore” threaded aluminum shocks with 3mm shafts and x-rings for improved smoothness

•  Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and 
    friction

•  Factory Team ball bearing kit included

•  Bolt on steering block arms offer increased adjustability

•  J-Concepts B64 clear body and wing included

• Silicone Shock Fluid (Refer to catalog for complete listings) 

• Silicone Diff Fluid (Refer to catalog for complete listings)

• Body Scissors (AE Part # 1737)  

• Reamer / Hole Punch   

• Wire Cutters   

• Hobby Knife 

• FT Hex Wrenches (AE Part # 1655) 

• Needle Nose Pliers 

• Thread Lock (AE Part #1596)

• Soldering Iron  

• Calipers or a Precision Ruler  • Green Slime shock lube (AE Part # 1105)

:: Additional

• Tires and Inserts, Fronts and Rears
• Wheels w/12mm Hex 
   Front Wheels #91574, #91575, #92095, #92096
   Rear Wheels #9695, #9696, #91570, #91571

Tools needed:
• FT Hex/Nut Wrenches (AE Part # 1519)

Your new B64 Club Racer Kit comes unassembled
and requires the following items for completion 
(refer to catalog section for suggestions):

• R/C two channel surface frequency radio system
• AA-size batteries for transmitter (#302 alkaline)
• Battery charger (a peak detection charger, or LiPo compatible charger)
• 2 cell LiPo battery pack (#310, 317, 737, 738)
• Polycarbonate specific spray paint
• Cyanoacrylate glue (#1597) 
• Thread locking compound (#1596)