5
:: Shock Build - Bag 1 - Step 1
:: Shock Build - Bag 1 - Step 2
:: Shock Build - Bag 1 - Step - 3
Bladder Installation
With the shaft extended 25%, place bladder on
the top of the shock body, displacing the extra oil.
While maintaining pressure on the bladder against
the shock body, carefully lift one side of the bladder
to allow any extra oil to escape. Place stock cap on
top of bladder, and secure it by threading the
aluminum cap retainer onto the shock body.
7/18
Build four
shock collars
Build four
shocks
Build four
shock shafts
31758
TC7.1 shock
collar o-ring
31758
TC7.1
shock collar
Shock Fluid
#5429
(35wt)
31756
TC7.1
shock cap
retainer
Shock fluid
#5429
(35wt)
Shock fluid
#5429
(35wt)
#1596
thread lock
Thread lock
not included!
!
31747
TC7.1
shock
piston
(4x1.1)
31757
TC7.1 shock
eyelet
31757
TC7.1
shock cap
31752
TC7.1
bladder
31752
TC7.1
shock shaft
bushing
31746
TC7.1
shock shaft
4637
FT pivot
balls
4637
FT pivot
balls
31745
TC7.1 FT
shock body
(Fox
Kashima
Coat)
89278
Steel washer
(2.6x6x0.5mm)
5407
Red
o-rings
31753
TC7.1 shock
bottom cap
31753
TC7.1 shock
bottom cap
o-ring
31510
M2x4mm
bhcs