7
/
15
Motor surface temperature could be high after long term operation. Please exercise caution
when touching or handling the product.
Power supply must be filtered DC. The input voltage shall be within the rated value for normal
operation. Voltage cannot be lower than 10V for lower voltage operation. Voltage cannot
exceed the rated value for long term operation and shall be always under 28V.
Power supply connection must be strictly according to the designated positive and
negative polarity. If the power supply is reversed, it will seriously damage the internal
driver and lead to malfunction of the motor. Red cable from motor shall connect to the
positive of power supply, blue cable from motor shall connect to the negative of power
supply. For detailed power connection guidance, refer to Chapter 4.1.
Please install the motor in an environment with good heat sinking and/or ventilation.
Inadequate heat dissipation will lead to the motor winding temperature exceeding the limit
of
85℃ and
will cause thermal damage to the internal electronic parts and winding, resulting
in motor malfunction and/or failure.
