ID-100 and ID-150 User’s Guide
AssureTec Technologies, Inc.
Page 10 of 15
6.
Status Indicators
The ID-100 and ID-150 document scanners have two LED status indicators on the front left
surface.
Name
Purpose
LED1
USB status / scan ready
LED2
Power status
The state of these LEDs will indicate the current status and assist in troubleshooting problems.
See the table below for interpreting the state of the indicators:
LED1
LED2
Meaning
Off
Off
Power is off. Check the power cable and switch.
Blinking Red
Green USB is not connected. Check the USB cable and connectivity.
Red
Green Device is in an error state. Restart device or reinstall drivers.
Blinking Yellow
Green Scanning a card.
Stable Yellow
Green Ready to scan.
LED1
LED2
