background image

                           

Before testing SureLock make sure the mandatory garage door opener 
adjustment described earlier was completed and garage door is in the fully 
opened position.
  1. Shift SureLock's red manual release lever to locked position (towards 
      door drack).
  2. Using the garage door opener remote control or wall switch/console, 
      activate the garage door opener to close the garage door.
  3. Verify that during this step the Lock-Arm(C) retracts into SureLock until 
      the garage door is fully closed and then automatically releases out into 
      the garage door track above door roller, 2 seconds after closing
      (thus locking the door).
  4. If SureLock did not function properly during this test, check system 
      wiring or call us for help.

DO NOT

 open the garage door if SureLock did not function 

properly during this test without first shifting SureLock's Red Manual 
Release Lever to unlocked position (away from door track).

  

 

To complete your SureLock installation, please locate the "Manual Release 
Signage Labels" and adhere as indicated. 
  1. Peel and stick the large white label onto the wall next to your garage 
      door opener's manual wall button/console 
      (you should use tacks or staples if needed to make sure label is 
      permanently secured)
  2. Peel and stick the smaller red label to the existing garage door 
      opener's emergency release cord (that would be the red string 
      hanging from your garage door openers rail).
  3. Make certain all users read and understand all information on labels.

Well, that completes your SureLock installation. At this point everything 
should be working as needed, and you should feel “A Lot” safer. 
You have now provided your family with the added protection they deserve!

Please let us know how you feel, do not hesitate in contacting us for any 
reason. We are here to help you in any way we can:

Automated Security Technologies, Inc. 
Phone Number: (800) 843-5625 ex.711
Email: 

tech@SureLock4Homes.com

Mon – Fri, 8am to 5pm (Pacific Time)

Web-Site: www.

SureLock4Homes

.com

CAUTION

Testing SureLock

     Mounting The Manual Release Signage Labels

AST / Product Concepts, Inc. 
Email: tech@ProductConceptsInc.com 
Mon - Fri, 8am to 5pm (Pacific Time) 
Web-Site: www.Garage-Lock.com

Summary of Contents for SureLock SLGDL-7













Reviews: