background image

               

To Prevent Serious Injury or Death
 1. Keep people clear of opening while Door is moving.
 2. DO NOT allow children to play with the Door operator controls.
 3. DO NOT operate a Door that jams or one that has a broken spring.
 4. DO NOT try to remove, repair or adjust springs or anything to which Door 
     springs are fastened, such as wood blocks, steel brackets, cables or 
     other like items.

In the event of an emergency there are two (2) procedures required 
before each automated garage door equipped with automated lock 
can be manually opened:
 1. Release garage door from garage door opener using the opener's 
     red emergency release handle/cord.
 2. Unlock automated lock mounted on garage door track, see 
     SureLock label for instructions.

   

  

 

 
 1. Close garage door.
 2. Release garage door from garage door opener
 3. Release automated lock located on garage door track.
 4. Manually open and close garage door.
 5. Re-engage (reset) both release mechanisms.

DO NOT perform this test while the garage door is open, as 
weak or broken springs may allow the garage door to fall 
rapidly, causing injury or death.

 IMPORTANT SAFETY INFORMATION

Important Emergency Release Instructions

Perform this test at least once a month

WARNING

CAUTION

Emergency Release Test

Without Secondary Garage Access ( Man Door )

An Emergency Release Must Be Installed During Installation

A Garage Door (Door) is a large, heavy object that moves with the help of 
springs under high tension and an electric motor. Since moving objects, 
springs under tension and electric motors can cause injuries, your safety and 
the safety of others depends on you reading and following the information in 
this manual. If you have any questions or do not understand the information 
presented please contact us: Phone Number: (800) 843-5625 ex.711
Email: 

tech@SureLock4Homes.com

PRE INSTALLATION REQUIREMENT

*

*

*

*

tech@ProductConceptsInc.com

Summary of Contents for SureLock SLGDL-7













Reviews: