Illustration A
Date of Manufacture
Automated Security
Technologies, Inc.
2470 Stearns St.#249
Simi Valley, CA. 93063
is a trademark of:
Made In China
Patent Protected
6834464
4Homes.com
Manual Release
Instructions:
Unlocked
Locked
Model: SLGDL-7
7. Now it's time to put the SureLock in place. While holding the SureLock
on the outside of the track, insert the "short-end" of the Lock-Bar(C)
through the 1" hole (Hole#2) in door track. With the Lock-Bar(C)
pressed against inside of door track insert short end of the Lock-Bar©
through the square hole in SureLock and vertically align SureLock so the
internal Lock-Arm interlocks with the
slots in the short-end of the Lock-Bar(C). (see illustration A)
Now shift the Red Manual Release Lever to the Unlocked position (away
from Door Track). If interlocked correctly this will pinch the Door Track
between the SureLock and Lock-Bar(C) holding them both in place to aid
with next steps.
8. Now you will need to position the Lock-Bar-Hinge(D) inside the door
track, by inserting the tabs of the Lock-Bar-Hinge(D) within the slots of
the Lock-Bar(C).
Using the supplied 1/4" Bolt(F) and 1/4” Nut(G), From inside of track insert
the first Bolt(F) through the Lock-Bar-Hinge(D) and the top most hole
(Hole#1) and then SureLock. Secure on outside of track by loosely
tightening with 1/4” Nut(G). Then from the inside of the track insert second
1/4" Bolt(F) through the bottom most hole (Hole #3) and then through
SureLock. Secure the second 1/4” Nut(G) so SureLock is aligned vertically
along track.
9. At this point check and confirm that SureLock's Lock-Bar(C) movement
through track is clear and smooth. You will need to shift the Red Release
Lever towards the track (Locked Position). With SureLock in normal
operating position simply depress the Lock-Bar(C) from inside of track with
your hand a few times to ensure smooth / clear operation.
10. Once you are comfortable everything is operating freely you can fully
tighten the 1/4" Bolt(F) and 1/4” Nut(G) using a 7/16" wrench
and screwdriver.
