Astaro Security Gateway 525
Operating Instructions
United Kingdom Sales:
Tel: +44 (0)8447 671131
Email: sales@sophos.com
North American Sales:
Toll Free: 1-866-866-2802
Email: nasales@sophos.com
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Email: sales@sophos.com.au
Boston, USA | Oxford, UK
© Copyright 2012. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners.
Sophos Operating Instructions 02.12v1.dNA
Installing a SFP GBIC module
Please read the operation manual to the SFP GBIC module. Carefully insert
the SFP GBIC module into the port until it engages.
The interface is immediately ready for use.
Removing a SFP GBIC module
1. Remove the fiberglass cable from the module you wish to remove.
2. Remove the module carefully from the port.
Depending on when you purchased your SFP GBIC module, it may have
any of three different release mechanisms: a plastic tab on the bottom of
the mini-GBIC, a wire bail, or a plastic collar around the mini-GBIC.
Please read the operation manual to the SFP GBIC module.
10. Serial console
You can connect a serial console to the COM port of the Astaro Security
Gateway hardware appliances. You can use, for instance, the Hyperterminal
terminal program included with most versions of Microsoft Windows to log
on to the appliance console. Use the provided RJ45 to DB9 adapter cable to
connect the console to your hardware appliance.
The required connection settings are:
Bits per second: 38,400, Data bits: 8, Parity: N (none), Stop bits: 1. Access
via the serial console is activated by default on ttyS1. The connections of
the appliances and the respective functionality are listed in the chapter
"Operating Elements and Connections."
